Guns

Wilson Combat ACCU-COMP V-Series: Nine Compensated 4″ 9mm Pistols on the X9 Platform, Red Dot Included

By SlavGuns 3 min read
Some links are affiliates.

Squat Squad, Wilson Combat just brought back a name with real competition history. The new ACCU-COMP V-Series is a family of nine compensated 9mm pistols with 4″ barrels, built on Wilson’s X9 platform and hand-fit in Berryville, Arkansas. Every one of them ships with a Holosun 507C X3 red dot already installed. Wilson says the series is available now through its website and participating V-Series stocking dealers.

Why the name matters

The original ACCU-COMP was Bill Wilson’s compensated custom 1911 from the early 1980s. It used a comp that pushed gas upward to hold the muzzle down, a bushingless barrel fit directly to the slide, and a full-length guide rod. At the 1983 World Practical Pistol Championship, Rob Leatham won the individual title with an ACCU-COMP, and three of the top five shooters were running one. Wilson’s pitch for the V-Series is the same idea four decades later, aimed at carry as well as competition: get back on target faster.

What every V-Series pistol gets

  • 4″ stainless compensated barrel, fluted, with a fluted chamber. Wilson’s release calls it a 3-port compensator
  • Ported slide and ported barrel on a 4″ stainless Tri-Top slide with an external extractor
  • Holosun 507C X3 red dot installed from the factory, with a black rear sight and green fiber optic front
  • Bullet Proof ambidextrous thumb safety, magazine release and concealment hammer
  • 3.5 to 4.5 lb trigger pull with a lightweight medium-length trigger pad
  • Frame-integral lightrail and reliability-enhanced frame rails
  • Black Armor-Tuff finish on the slide
  • 8.7″ overall length and a 5.6″ sight radius
  • Hand-fit, function-tested and guaranteed to shoot 1.5″ groups at 25 yards

The release also mentions a patent-pending RPG guide rod. Wilson says the 8.7″ length means the guns fit holsters made for the X9L or a full-size Government 1911.

The nine models

The variations come down to grip texture (X-TAC or TRAK), frame style (grip-panel or solid), and 15 or 18 rounds. The 18-round models add a magwell and stand 5.75″ tall instead of 5.25″. Empty weights below are from Wilson’s model pages:

  • V1: The original EDC X9 X-Frame, Wilson’s largest grip frame, with X-TAC texture. 15 rounds, 1.4″ wide, 30.9 oz
  • V2: X-TAC grip frame. 15 rounds, 1.4″ wide, 31.5 oz
  • V3: X-TAC grip frame with magwell. 18 rounds, 1.4″ wide, 32.4 oz
  • V4: Lightweight grip frame with TRAK texture. 15 rounds, 1.4″ wide, 31 oz
  • V5: Lightweight grip frame with TRAK texture and magwell. 18 rounds, 1.4″ wide, 31.7 oz
  • V6: Solid aluminum X-Frame with X-TAC texture. 15 rounds, 1.15″ wide, 30.9 oz
  • V7: Solid aluminum X-Frame with X-TAC texture and integrated magwell. 18 rounds, 1.15″ wide, 31.8 oz
  • V8: Solid aluminum TRAK-Frame. 15 rounds, 1.15″ wide, 30.4 oz
  • V9: Solid aluminum TRAK-Frame with magwell. 18 rounds, 1.15″ wide, 31.3 oz

V1 through V5 wear Black G10 Starburst grip panels, while V6 through V9 use solid aluminum frames with X-TAC or TRAK texture on the frontstrap and backstrap. Each pistol comes with two magazines matching its capacity.

Who it’s for

Wilson gives a nice hand-size guide on its site, and I’d use it before anything else:

  • Small to medium hands: V6 through V9. These solid-frame guns feel like a 1911 with standard grips, and at 1.15″ wide they’re the slimmest carry options in the lineup
  • Medium to large hands: V2 through V5, on Wilson’s medium-size grip frame
  • Large to XL hands: V1, the biggest grip frame Wilson offers

Beyond that, this is for the shooter who wants a hammer-fired, 1911-style double stack with a comp and a dot right out of the box, and who’d rather buy a finished custom-grade gun than piece one together.

Our take

Comped carry guns are everywhere right now. I covered the Springfield Echelon 4.0FC Comp just last week. Wilson’s take is a very different animal: an aluminum-frame, hand-fit double stack with a 1.5″ accuracy guarantee and a red dot already on it. Nine models sounds like a lot, but it’s actually simple. Pick your texture, pick slim or grip-panel, then pick 15 or 18 rounds. Holster compatibility with X9L and Government 1911 rigs is a nice touch because you won’t be hunting for a niche holster.

What I want to see is how much the ported slide, ported barrel and 3-port comp actually flatten a 4″ 9mm in real shooting, and how the 507C X3 holds up on a gun that’s venting gas near the optic. I haven’t shot one yet, so this is based on the announcement and Wilson’s spec pages, not a review.

More on slavguns.com: the Springfield Echelon 4.0FC Comp and the Manurhin MR73 Gendarmerie, another high-end handgun with a lot of history behind it.

Where to find it

Wilson lists the full V-Series with specs and its participating stocking dealers on the ACCU-COMP V-Series page. Inventory and model availability vary by dealer.

Sources: Wilson Combat release via The Outdoor Wire; Wilson Combat: ACCU-COMP V-Series and the individual V1 through V9 model pages.

Want more gun news and range time? Join the channel and keep squatting!

Some links are affiliates.

SlavGuns

Hands-on reviews, range time and budget picks on YouTube since 2019. Subscribe · About

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.