Gear

Daniel Defense NULL556: A 3D-Printed Inconel 5.56 Can Built for Short Barrels and Hard Use

By SlavGuns 3 min read
Some links are affiliates.

Squat Squad, Daniel Defense just added a new can to its NULL family. It’s the NULL556, a 5.56 suppressor 3D printed from Inconel. Daniel Defense built it for short-barreled rifles and full-auto hosts, the guns where a regular can turns into a gas-to-the-face machine. The company announced it on November 16, and the release went out through The Outdoor Wire on November 20.

What it is

The NULL556 is a high-flow, hard-use rifle suppressor. Daniel Defense prints it in one piece with metal additive manufacturing (DMLS) from 718 Inconel, a nickel-based superalloy. That means there’s no stack of separately machined baffles and no welds holding it together. Inside is what they call a multipath baffle system. It slows and cools the gas without choking the rifle, then end-cap apertures at the front let the gas out at the muzzle instead of pushing it back toward your face.

The idea behind the NULL line is pretty simple: on a gas gun, the noise isn’t the only problem. Backpressure speeds up the bolt carrier, beats up the parts and sends gas and particulate back at the shooter. Daniel Defense says the NULL556 is built to keep that added carrier speed down no matter how long the barrel is. It also says the can is set up to cut visible flash, especially with heavier defensive loads.

Key specs

  • Calibers: Optimized for 5.56/.223, 5.56 high-pressure loads and 6 ARC; Daniel Defense also lists it as rated for 6 CM, 22 CM and 22 ARC
  • Construction: 3D printed (DMLS) 718 Inconel, multifaceted outer tube
  • Weight: 14.7 oz per Daniel Defense’s spec sheet (the release says “less than 14.7 ounces”)
  • Length / diameter: 5.8″ / 1.75″
  • Mount: Steel HUB interface; ships with a direct-thread HUB mount for 1/2×28 muzzles
  • Sound reduction: About 20 dB per Daniel Defense, varying with barrel length and ammo
  • Ammo note: Flash reduction tuned for heavier-grain and defensive ammo (62 gr and up)
  • Extras: Integral flash hider design and a visual maintenance cue for quick field checks
  • Finishes: Black or FDE Cerakote (part numbers 06-140-06315-125 and 06-140-06315-124)

According to the release, Daniel Defense ran it under heavy cyclic fire “well past the point of visible thermal stress.” The company gives credit for that to the conductive material, the extra flow in the design and the added surface area of the faceted tube. Jacob Becker, Daniel Defense’s Director of Marketing, said the goal was “to eliminate the compromises traditionally associated with hard-use suppressors.”

The release says it’s available now. When I checked, Daniel Defense’s own NULL556 product page and the retailer listing below both showed it out of stock, so expect to hunt for it for a bit.

Who it’s for

This is a can for the 10.3″ to 11.5″ carbine crowd, SBR builds and anyone running a 5.56 hard on a training day. On those guns, backpressure is what makes suppressed shooting miserable. If all you want is the quietest possible can for a 16″ bolt-action or a semi-auto plinker, a 20 dB rating isn’t trying to win that race. The NULL556 is trading a little quiet for less gas, less wear and a light front end. Since it uses HUB, folks who already run HUB-mount cans can fit it into what they have.

Our take

I like where Daniel Defense is going with this. A lot of us have run a suppressed short AR and come home with gas in our eyes and a carrier that’s beating itself to death. A 14.7 oz printed Inconel can that’s built around flow first fixes a real problem. Inconel is a superalloy known for handling heat, which matters if you run your rifle hard. My caveats: it’s a brand-new design with no long-term track record yet, and 20 dB is a modest number. The way to judge it is how it feels behind the rifle, not just the meter reading. I haven’t had one on a rifle yet, so this is based on Daniel Defense’s announcement and product page, not a range review. Also, check your state and local laws before you order any suppressor. Daniel Defense’s product page has a section that walks through the current buying process.

If 3D-printed Inconel cans are your thing, check out my write-up on the Banish HD 762 INC, an all-Inconel can built for hard-use gas guns.

Where to find it

Daniel Defense has it on the NULL556 product page. It’s also listed at GrabAGun. Stock varies by dealer.

Sources: Daniel Defense release via The Outdoor Wire (Nov. 20 edition); Daniel Defense: NULL556 Suppressor; Daniel Defense: NULL556 specifications.

Want more gun news and range time? Join the channel and keep squatting!

Some links are affiliates.

SlavGuns

Hands-on reviews, range time and budget picks on YouTube since 2019. Subscribe · About

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.