Squat Squad, this one is a look back to January 12, 2021, when I sat down with Matt Foster, founder and president of Catalyst Arms and FMJ Marketing (the rep firm behind brands like Choate stocks, Fix It Sticks, Anarchy Outdoors and Big Horn Armory), to answer the stock vs chassis questions you’d been sending in all year. This was a conversation, not a range test or a review of any one product.
We already have the big-picture breakdown in Stock vs Chassis? Which Is Right For You?, which ran with the Odysee copy of this video. This time I want to pull out the part of the talk that saves people the most frustration (and ammo): bedding, torque, and the boring setup work that matters more than which platform you pick.
Why chassis took off in the first place
Ten years before this video, chassis rifles barely came up in conversation. Matt’s take on why that changed:
- Traditional target stocks came first. A vertical pistol grip, a wide flat fore-end for riding bags, an adjustable cheek piece for eye alignment, and often a hook and flat toe for a rear bag. A chassis basically approximates that layout.
- Modularity is the hook. Swap grips and buttstocks (some chassis take AR-15 style stocks), add weight or a night vision bridge through M-LOK slots, or hang a MagnetoSpeed chronograph mount. It turns a bolt gun into what I called bolt action Legos: a custom action, a chassis, a barrel, a grip, and you’ve built your own rifle.
- Drop in and shoot. Ordering a composite stock can mean a long lead time, and it’s usually still recommended you bed it. A chassis let a lot of guys just drop the action in and go.
- Looks and feel count too. Matt was honest that some of it is style. Some shooters just want a traditional stock.
To bed or not to bed
Some shooters skim-bed even an aluminum chassis: a thin coat of bedding compound on the contact surface, cinch the action down, and every void is taken up. Matt said straight up he didn’t know if that buys you anything on a chassis. In the Choate stock he had on the table, which has an aluminum chassis running its full length (more than a bedding block), the action sits in a V-block and self-centers. He’s put plenty of actions in those stocks and never bedded one.
Composite stocks are a different story. They’re routed on a CNC, and a gap is a gap whether it’s a thousandth or ten thousandths, so his view was you probably still want to bed one. That’s an extra step, and bedding is a little scary. Nobody wants to epoxy their action into their stock permanently (ask him how he knows).
The real accuracy killer: loose screws
This was the most useful stretch of the conversation. Matt said the often-overlooked step is torquing the action screws to spec. My add: a lot of “accuracy problems” aren’t bad equipment, they’re loose action screws or a loose scope rail.
I had my own example. Testing a Thompson Center LR-R, a great gun, my groups suddenly opened up from under an inch to around two and a half. I was going crazy wondering if it was my loads. Then I touched the scope and the whole thing turned over. Both action screws and the scope base were loose. Before that, I’d burned probably 40 to 60 rounds of .308 chasing the same kind of problem on another rifle.
Matt’s checklist for any new rifle, and it takes 5 to 10 minutes:
- Don’t just pull it out of the box and slap a scope on it. Rifles are still put together by humans, and fasteners aren’t always at the right torque. That’s not a dig at the factory.
- Put a little oil under the scope base and torque it down properly.
- Tighten the action screws to spec.
- Torque any other fasteners to their specification too.
The tool for this is a torque driver. We’ve covered the Fix It Sticks torque kit that lives in your pack, and their Rifle & Optics Toolkit with individual torque limiters is the kind of set that covers action screws and scope rings in one case.
Does chassis vs stock change accuracy?
Matt’s answer to the loaded question: top shooters who win match after match run both, so it’s six of one, half a dozen of the other. The one practical difference: you generally won’t need to bed a chassis, while a stock may benefit from bedding.
A few other points that came up:
- Adding weight is easier on a chassis because of all the attachment points, but stock makers have responded with M-LOK slots and rails. Matt pointed out the Choate stock has an Anschütz rail on the bottom, and he mentioned working on an ARCA attachment.
- Cheek contact: a wood or rubber riser beats cold or hot metal on your face.
- Hybrids: we talked about Woox blending wood and chassis. Neither of us had shot one yet at the time. We later saw the Woox Furiosa Ultra and Titano at SHOT Show 2022.
- It depends on the game. King of 2 Miles and F-Class shooters lean toward custom stocks. PRS leans chassis, partly because chassis companies like MDT sponsor a lot of those matches, and partly because PRS and field matches are more dynamic: barricades, ports, tires and rocks, where sliding a bipod all the way back to the magwell is handy.
Our advice for new shooters
Here’s how I wrapped it up, and Matt agreed: if you’re new, buy a decent gun and go shoot. You’ll figure out your preferences from there. Otherwise we’d all be driving Toyota Camrys and Ford Explorers. Matt’s version: get a good action, then a decent stock, and get it into a stable platform instead of a squishy Tupperware stock. He named Choate and Magpul as two of many good options. If you’re stuck between a factory stock and a chassis on a specific rifle, our Mossberg Patriot Predator upgrade priorities walks through how we’d spend the money.
And there are no stupid questions. If something’s bugging you, ask. Most gun guys out there are happy to help, because it’s all about growing the number of gun owners.
Gear from this conversation
- Torque the screws first: Fix It Sticks Rifle & Optics Toolkit with individual torque limiters
- Thinking chassis? Browse MDT chassis and stocks
- Precision rifle parts from another FMJ client: slav.li/anarchyoutdoors (code SlavGuns works on Anarchy Outdoors-made parts)
- Eye pro, ear pro and the rest of what I run: slav.li/amazon
- Want member perks and a say in upcoming videos? Join the channel
Thanks to Matt for joining, thanks to you for watching and reading, and keep on squatting!
Some links are affiliates.





Comments